LHT 26″ Wheeled Build PT7…

14 07 2011

I've made some progress!..=-)

The 26″ wheeled Surly LHT project is moving along nicely! I got a bunch of stuff taken care of now that the weather has been a bit grim and work hasn’t been full on.

The drivetrain is installed...

I got a SRAM 9 speed chain installed and pedalled the bike down the block like this to finally get a feel for what she’s like. The big soft tires are fun and it feels like the offspring of a mountain bike and touring bike…=-)

Backend bling!

I don’t normally roll with XTR bling on my bikes, but I found this derailleur in my spares bin and it’s in good shape so on it went!

Crank clearance...

I swapped in a 122mm square taper crank and got the necessary clearance with the chainstay on both sides.

Downtube shifter...

To start with the bike will be a 1×9 that I can shift up front with my hand if needed. Depending on how that goes I may add a front derailleur or I may not bother. The downtube shifter is the second half of the one I used to shift the front triple on my rando bike. I haven’t cabled it in yet, but will do that next session.

V-brakes at the back...

Shimano Deore V-brakes with salmon Koolstop pads are on the back.

V-brakes at the front...

Same setup at the front.

A splash of colour...

I thought I’d try a bit of colour on the bars and with the cable housing. Frankly I’m not 100% on the red yet, but it’s worth a shot. If I don’t like it I will change it later in the year. Dia-Comp 287V levers.

Silver seatpost...

I got a cheap unbranded silver seatpost that looks more elegant than the F-ugly one I had found in my parts bin.

Next up cable up the shifter go for a test ride. Then racks and fenders!