Getting the right Rohloff for your Big Dummy

24 12 2008
Rohloff - fine German engineering for bikes!

Rohloff - fine German engineering for bikes!

One problem with buying a Rohloff hub is that there are a TON of options to navigate if you want to get the right hub. In this post I’ll run through the options to let you know what works and what I chose.

Colour:

  • available in red, black and silver
  • the anodized cases [black and red] should withstand salt and other elements a bit better than the polished aluminum case
  • cases are now laser engraved. If you see one with a sticker on the hub it is older stock.
  • I chose black for the stealth Big Dummy look
Axle:
Internal or External Gear Mechanism:
  • the external gear mechanism is a box that attaches to your hub and your cables terminate there
  • this means you can easily detach it for removing the rear wheel
  • cables are run fully covered to the external gear mechanism so they are immune to the elements
  • it is easier to field service the external gear mechanism
  • the trade off is the shifting is slightly less smooth
  • you cannot use disc brakes with the internal gear mechanism
  • I went with the external gear mechanism for the ease of maintenance and so I could use disc brakes.
Disc Brakes:
  • you will need to use the external gear mechanism
  • you will need to specify disc brake use when ordering your hub
  • you will need a Rohloff specific disc rotor
  • you can use a Rohloff disc hub on a rim brake bike as long as you use a rim with a braking surface
  • I went this route as I wanted to use Avid BB7 disc brakes on my Big Dummy
Torque Support:
  • without any torque support the hub will want to spin and will not drive the bike forward
  • you can get a Rohloff with the following torque support options:
  • you need to be sure you get the OEM2 axle plate
Accessories you’ll need:
  • chain tensioner – you’ll need this as the Big Dummy has vertical drop outs. Keep in mind there is a standard and DH version. You want the standard version.
  • Tandem length cables – due to the length of the Big Dummy you’ll need the longer tandem length cables.
  • Rohloff specific disc rotor – you cannot use the rotor supplied with your brakes as it will have the wrong bolt pattern.
Accessories you may want:
  • chain guide – keeps your chain on the front ring
  • oil change kit – you’ll need one of these every 5,000kms so it migt be easiest to buy one or two when you get your hub.
  • Sprockets -all hubs come with a 16T sprocket. You can also get 13T, 15T & 17T sprockets.
Non-Rohloff specific parts you’ll need:
  • 38T or larger front chain ring that will fit on the outside of your cranks – same position as big chain ring on a MTB triple. You want a ~54mmm chain line. This chain ring does not need to be pinned and ramped. You’ll be able to flip it around and use the other side when it wears out.
  • 2 chains – you’ll only use 1 and a bit, but you can save the extra portion and use it dnotw h road. You’ll also be able to flip your chain and rear cog around when things start to wear out and get more miles out of your drive train. I bought two 8 speed SRAM chains as they were cheap.
Rohloff Part Numbers

To make your life easier here are the part numbers you can use to ensure you are getting exactly what you need when you order your Rohloff hub:

  • Silver disc brake CC External Gear Mech OEM hub [specify OEM2] – #8025
  • Red disc brake CC External Gear Mech OEM hub [specify OEM2] – #8026
  • Black disc brake CC External Gear Mech OEM hub [specify OEM2] – #8027
  • Axle plate OEM2 [if you forgot to ask for it like I did and got an OEM hub] – #8227
  • Tandem Length cables – #8267
  • Chain Guide – #8290
  • Avid/Shimano 160mm disc rotor – #8281S
  • Hayes 160mm disc rotor – #8281H
  • Magura 160mm disc rotor – #8280
  • Oil Change Kit – #8410
  • 13T Sprocket – #8219
  • 15T Sprocket – #8220
  • 16T Sprocket – #8221
  • 17T Sprocket – #8222

Actions

Information

4 responses

24 12 2008
Duncan Watson

Very cool. I didn’t realize there was a 13t sprocket available. That helps me for my use on a future raptobike purchase. I need to go play with a gear calculator now.

30 12 2008
Joel

Is it possible to order the 1-litre size containers of Rohloff oil and flush solution from a US vendor? I’m planning to do the recommended yearly service and I don’t see the point in overpaying for the fluids every time.

15 01 2009
thelazyrando

You can certainly get the large volume fluids from Thorn bikes in the UK and I don’t see why Rohloff USA wouldn’t sell them as well.

1 01 2010
Gerco

Hey Vik,

I found this little video on the web.. It is a video shot at the Rohloff factory, showing the production of the hub. Unfortunatly the video is in German only. But i think you can still get an impression of the manufacturing and the precision of the work.

See this link: http://videos.mtb-news.de/videos/view/3575

Gerco

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s




%d bloggers like this: